Description
Risk detection (ADAS) alerts
Forward Collision Warning
Lens Departure Warning
Headway Monitoring Warning
Pedestrian Crossing Warning
Stop Sign
Speed Sign
Risk detection (DSC) alerts
Distraction
Seat Belt
Lens Covered
Fatigue
No Driver
Yawning
Phone Call
Smoking
Universal Vehicle Compatibility
Compatible with all vehicle types
Enhanced Audio Clarity
Echo and noise-canceling technology for high-quality audio communication
Constant Device Access
Available access to the device anytime, anywhere, even with the ignition off
Extended Storage
Up to 10-15 days of camera video storage, giving you plenty of coverage history
Live Safety Alerts
Immediate notifications for unsafe driving events like speeding or collisions
Parked Vehicle Monitoring
Online even when the vehicle is parked, capturing events and alerting you if something happens while saving battery life
Specification
Product model: AD Plus2.0
System
Language
Other options: Chinese, English, Spanish (Latin American), Portuguese (Latin American), French, Russian and Japanese.
* The language includes interface language and voice reminders. TTS supports Chinese and English only.
Video/Audio
Video/Audio Recording
Max. Capability
(with 2-channel AI)
Recommended configuration:
(1920P@20fps+1080P@15fps+1080P@20fps (AHD) +800P@20fps (IPC))
Image Setup
Video Coding
Audio Compression Standard
CBR/VBR
Audio
Loudspeaker
Parameters of road facing lens
Sensor Type
Shutter Speed
Lens
HFOV: 123°; VFOV: 65°; DFOV: 140°; Deviation: ±5°
Minimum Illuminance
Lens Mount
Wide Dynamic Range (WDR)
Backligh Compensation
Signal-to-Noise Ratio (S/N)
Video/Audio
Sensor Type
Shutter Speed
Lens
HFOV: 151°; VFOV: 84°; DFOV: 170°; Deviation: ±5°
Lens Moun
Wide Dynamic Range (WDR)
Backlight Compensation
Signal-to-Noise Ratio (S/N)
Infrared Lamp
* Threshold: 4 lux from daytime to night, and 8 lux from night to daytime. There may be some deviations for different devices. Please refer to the actual measurements.
LED Indicator Status
Power Status Lights
Off: The device is not powered on
Steady green: The device is powered normally
Alarm Indicator
Off: The device does not generate any alarm
Red flashes three times: The device generates an alarm
GPS Signal Indicator
Off: The device positioning runs normally
Steady red: The device positioning runs abnormally (not positioned, or module not connected or damaged)
Red flash (once per second): The device positioning is poo
Network Status Indicator
Off: The device is connected to the server normally
Steady red: The device is connected to the server abnormally
Red flash (once per second): The device is in airplane mode
* Airplane mode: Turning off the network signal of the dashcam to ensure safety when the vehicle enters the gas station.
Wi-Fi Status Indicator
Off: The device is in Disable or Client mode
Steady green: The device is in AP mode
Steady red: The device Wi-Fi runs abnormally
Recording Status Indicator
Off: The built-in or extended camera runs normally Steady red: The built-in or extended camera stops (including privacy mode)/fails
* When the video recording function is enabled (main stream and sub stream), the prompt will be given if no recording is detected. If the video recording function is disabled (main stream and sub stream), it will be regarded as normal recording status.
Storage
Micro SD card
Read/write rate: Class10 or above is recommended
Sensor
Six-axis Sensor
Environmental Light Sensor
Port
RS232
I/O Port
CAN
Warning: As some data fields may be customized by automobile manufacturers, the final measured data shall prevail. In the event that any required data is not supported, the integrated development is acceptable based on a specific protocol.
USB
Button
To switch Wi-Fi to AP mode, press the button twice within 2s.
* For details of other buttons, refer to the user manual of the product.
Network
Wi-Fi
/IEEE Std.802.11n)
4G
For North America: LTE FDD: B2/B4/B5/B12/B13/B14/B66/B71 WCDMA: B2/B4/B5
For Europe and Asia: LTE FDD: B1/B3/B7/B8/B20/B28A WCDMA: B1/B8 GSM: B3/B8
For Latin America: LTE FDD: B1/B2/B3/B4/B5/B7/B8/B28 LTE TDD: B40 WCDMA: B1/B2/B5/B8 GSM: B2/B3/B5/B8
Warning: The industrial SIM card (MP2) is required, and the ordinary SIM card (MP1) is prohibited. We are not responsible for any problem caused by the use of any ordinary SIM card
GNSS
GPS L1 1575.42MHz
GALILEO E1B/C1
GLONASS L1OF 1602MHz
SBAS: WAAS, EGNOS, MSAS, GAGAN
Power Related
Power supply
Power consumption
In sleep mode (4G and MCU powered):13.5V@62~124mA, 27V@32~61mA
Typical power consumption (with dual SD cards installed and SIM card for dialing): about 7.56W
Full-load power consumption (with dual SD cards installed, SIM card for dialing, Wi-Fi turned on, IPC and AHD connected, and infrared lamp turned on): about 12.66W
* The above data are test data obtained in a specific environment in the laboratory, and may vary with the individual product differences, service environment, and testing methods.
Environment
Operating Temperature -4
Storage Temperature
Operating Humidity
Storage Humidity
IP Rating
* The Dashcam is non-waterproof
Dimensions and Weigh
Dimensions L×W×H
Package: 176 mm×150 mm×114 mm; Deviation: ±3 mm
Weight
Gross weight (including accessories and package): 745g
Deviation: ±10g
* The actual dimensions and weight may vary with the individual product differences, manufacturing processes, and testing methods.
Package Contents
* The configuration may vary in different regions.
Besides providing live fleet views of the road, our AI dashcams offer advanced safety alerts to quickly detect risky driving behaviors, helping to prevent accidents. Their compact design ensures clear, unobstructed visibility in any vehicle and helps improve road safety.
What They’re Saying
Need more info? Check out our most frequently asked questions.
How do dashcams work?
Dash cams work by continuously recording video of the road ahead while the vehicle’s ignition is on and 15 minutes after the ignition is off. They are generally powered by the vehicle’s power source and save the recorded video to an internal storage device (SD card) to later be accessed manually.
Are the cables included in the package?
The cables are not included in the package. You can order them separately on our website.
How do I install the Dashcam?
The camera is a plug-and-play solution. It is shipped with all required accessories for installation in a light/medium-duty vehicle with a 16-pin OBDII port or 9-pin.
Does the camera drain my vehicle’s battery?
The camera is always monitoring the vehicle’s battery and will automatically shut itself down if it detects that the vehicle battery voltage falls below 11.9VDC for more than 5 minutes, ensuring it does not drain the vehicle battery when parked for extended periods.
Do dash cams work in areas with no cellular signal or Wi-Fi?
Yes, dashcams will continue to provide in-cab alerts to drivers with limited or no cellular coverage, and event footage will be cached on the dashcam. Once connectivity is restored, the videos will be sent to the platform and available for viewing.
